QoS (Quality of Service) for Better Traffic Control

Provides different priorities to different applications, users, or data flows to reduce packet loss,
latency, and jitter on a network.

Uncontrolled traffic causes network congestion and packet loss

Classify and prioritize traffic for optimum efficiency

10G with Server

S3900-48T6S-R

S3900-48T6S-R, 48-Port Gigabit Ethernet L2+ Switch, 48 x Gigabit RJ45, with 6 x 10Gb SFP+ Uplinks, Stackable Switch

US$569.00

SFP-10G-PC01

1m (3ft) Cisco SFP-H10GB-CU1M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable

US$14.00

X710BM2-2SP

Intel X710-BM2 Based Ethernet Network Interface Card, 10G Dual-Port SFP+, PCIe 3.0 x 8, Comparable to Intel X710-DA2, Full Height&Low Profile

US$239.00

RS7260

RS7260, 2U Rackmount Server, Dual Intel® Xeon® Scalable Processors, Up to 4 x 16GB DRAM, 2 x 2.5” Hot-swap SAS HDD Drive Bays, 2 x RJ45 10GbE Ports, 1000W Redundant

US$6,589.00

10G Interconnect

S5860-20SQ

S5860-20SQ, 24-Port Ethernet L3 Switch, 20 x 10Gb SFP+, with 4 x 25Gb SFP28 and 2 x 40Gb QSFP+, Support Stacking, Broadcom Chip

US$1,999.00

SFP-10GSR-85

Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Duplex LC/UPC MMF Optical Transceiver Module

US$25.00

OM4LCDX

2m (7ft) Fiber Patch Cable, 2 Fibers, LC UPC Duplex to LC UPC Duplex, Multimode (OM4), Riser (OFNR), 2.0mm, Tight-Buffered, Aqua

US$6.80

FHD-1UFMT-N

FHD® High Density 1U Rack Mount Enclosure Unloaded, Tool-less Removable Top Cover, Holds up to 4 x FHD® Cassettes or Panels, 144 Fibers (LC)

US$149.00

FHD-1MTP6LCDOM4A

FHD® MTP®-LC Cassette, OM4 Multimode, Type A, 12 Fibers, MTP®-12 (Male) to 6 x LC Duplex (Aqua), 0.35dB max

US$109.00

12FMTPOM4

10m (33ft) MTP® Jumper, MTP®-12 UPC (Female) to MTP®-12 UPC (Female), 12 Fibers, Multimode (OM4), Plenum (OFNP), 0.35dB Max, Type A, Magenta

US$136.00

FHD-CMP5DR

Horizontal Single Sided Cable Manager for 19 in. Rack or Cabinet, 0RU, 5 Snap-in D-Rings, 4.29 in. Depth

US$46.00

FHD-1MTP6LCDOM4AF

FHD® MTP®-LC Cassette, OM4 Multimode, Type AF, 12 Fibers, MTP®-12 (Male) to 6 x LC Duplex (Aqua), 0.35dB max

US$109.00

S3900-48T6S-R

S3900-48T6S-R, 48-Port Gigabit Ethernet L2+ Switch, 48 x Gigabit RJ45, with 6 x 10Gb SFP+ Uplinks, Stackable Switch

US$569.00

SFP-10GSR-85

Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Duplex LC/UPC MMF Optical Transceiver Module

US$25.00

Q: Does S3900-48T6S-R allow for LACP configuration?

A: Yes, it does. LACP (Link Aggregation Control Protocol) increases its logical bandwidth and network reliability and provides link-level redundancy in network failure and load-balance traffic, improving the reliability of the access layer network. LACP can simplify network management by reducing the number of physical links that need to be managed and configured.

提问者: Noack 日期: on 09/24/2024

Q: Are ACLs supported by S3900-48T6S-R model?

A: Yes, S3900-48T6S-R supports ACLs (Access Control Lists). You can use an ACL to specify the servers, networks, and services that users can access, preventing unauthorized access. It also can be used to block high-risk ports and external traffic. Moreover, it improves network bandwidth utilization to ensure the bandwidth of voice and video services that have the highest requirements on service quality.

提问者: Grateron 日期: on 09/23/2024

Q: What are the differences between L2+ switches and L3 switches?

A: L2+ switches operate at the data link layer and provide basic switching functionality, including MAC address learning, forwarding, and VLAN support. They are suitable for small-scale LANs and basic network connectivity. On the other hand, L3 switches work at the network layer and offer advanced features such as IP routing, subnetting, and support for routing protocols. They are ideal for larger networks, data centers, and environments requiring complex routing and network management capabilities.

提问者: Adare 日期: on 05/30/2024

Q: What is the difference between MLAG and stacking functionality in switches?

A: MLAG (Multi-Chassis Link Aggregation) and stacking are two different approaches to achieve high availability and link aggregation in switches: MLAG allows multiple switches to work together as a single logical switch. It enhances redundancy and load balancing by creating a link aggregation group across switches. Stacking involves physically connecting multiple switches to form a single unit. They operate as one switch, sharing a common management interface and backplane. Stacking simplifies management and increases port density. In summary, MLAG creates a virtual switch with redundancy, whereas stacking physically combines switches into a single entity for simplified management and increased capacity.

提问者: Martin Davis 日期: on 05/29/2024

Q: What are the highlights of a three-layer network topology with switches?

A: A three-layer network topology with switches provides several benefits:
1. Enhanced Scalability: It allows for easy expansion and growth of the network.
2. Efficient Traffic Management: Traffic can be distributed and controlled more effectively, improving performance.
3. Improved Security: Segmentation at different layers enhances security by isolating and controlling access to network resources.
4. Streamlined Troubleshooting: Network issues can be isolated to specific layers, simplifying the troubleshooting process.
5. Optimal Performance: The layered approach optimizes network performance by separating functions and reducing congestion.

提问者: Sergio Clark 日期: on 05/27/2024

Ordered it Thursday and received it Monday.
Looks good.

评价人: S***l 来自: Canada 日期: April 23, 2024

Very fast delivery.

评价人: M***c 来自: Slovenia 日期: January 15, 2024

They showed up next business day.
Sent a request for technical assistance and got the info needed the next day.

评价人: S***l 来自: Canada 日期: November 24, 2023

Simply an Excellent device. I would highly recommend this switch for professional use. It is very fast and has all the functions you need and more. As always the shipment was very fast too. When using it in a home environment without sound proofing, this switch is far too loud: you will have to replace the fans by more quiet ones, or add bigger fans in the lid of the device to lower the sound production.

评价人: C***d 来自: Netherlands 日期: November 14, 2023

Accessing resources is very fast. We were able to deploy computer images in half the time it would take with our old hardware.

评价人: C***n 来自: United States 日期: October 17, 2023

Sustainability and energy savings.

评价人: J***n 来自: United States 日期: October 02, 2023